CHTJM - H-D PLUS EXTRA VACUUM PUMP OIL
- MSDS: CHTJM
- Manufacturer: MORAINE OIL SALES INC
- Product Name: H-D PLUS EXTRA VACUUM PUMP OIL
- National Stock Number: 9150-00N088130
Product Identification
Product ID:H-D PLUS EXTRA VACUUM PUMP OIL
MSDS Date:07/01/1992
FSC:9150
NIIN:00N088130
Status Code:A
MSDS Number: CHTJM
Responsible Party
OCONOMOWOC, WI 53066
US
Emergency Phone: 414-567-7523
Info Phone: 414-567-7523
Cage: 24440
Contractor
Telephone: (414) 567-7523
Cage: 24440
Ingredients
NON-HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT) >5000 MG/KG.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN IRRITATION:NOT EXPECTED TO
CAUSE IRRITATION. BASED ON DATA FROM COMPONENTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN:WASH W/SOAP & WATER. EYES:FLUSH W/WATER FOR AT LEAST 15
MINUTES. INHAL:REMOVE TO FRESH AIR. SEE MD IF IRRITATION PERSISTS.
INGEST:CALL MD. DO NOT INDUCE VOMITING.
Fire Fighting
Flash Point:>425F,>218C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER SPRAY, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:PREVENT ENTRY INTO SEWERS & WATERWAYS. PICK UP
FREE LIQUID FOR RECYCLE/DISPOSAL. ABSORB SMALL AMOUNTS OF INERT
MATERIAL FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:MECHANICAL VENTILATION RECOMMENDED.
Protective Gloves:NEOPRENE OR NITRILE RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING & LAUNDER BEFORE
USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:0.875
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER LIQUID; MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON.
Disposal
Waste Disposal Methods:IF DISPOSED OF, THIS MATERIAL IS BELIEVED TO BE
NON-HAZARDOUS. DISPOSAL SHOULD BE IN COMPLIANCE W/FEDERAL, STATE &
LOCAL LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.